>>

Inquiry >>

An Electrical Power Study is an Electrical System Analysis performed by the Arc Flash Study Pro that includes any or all of the diagnostic or preventative services listed below. The following studies below are the most important and most essential for you to get your electrical system properly set up and reliable.

Collect data about your facility's power distribution system, and conduct short circuit and protective device coordination studies to identify arc flash hazard categories for electrical equipment, as well as how to reduce them.Also, look into technologies such as remote racking equipment and arc limiting fuses that help keep personnel as well ...

The transition from arc fault to arc flash takes a finite time, increasing in intensity as the pressure wave develops. ... What is now important is to obtain: ... engineering firm perform the calculations for arc flash hazards for the devices in your facility and have them recommend any necessary plans that when executed would result in the ...

maintenance program will all contribute to the success of your analysis. Multiple arc flash incidents occur in workplaces across the United States every day. The risk of an arc flash explosion occurring at your facility is not negligible. The ongoing trend toward increasing power usage combined with an aging

Are you concerned about the arc flash safety of your facility? Do you want to know how to carry out a competent arc flash study? This is your guide to a detailed arc flash analysis! Have a look at the infographic to have a quick review of the seven steps. Read the blog to find out the systematic way in which a proper arc flash study is performed.

Now ask yourself, how old is your system? When was the last time you conducted electrical preventive maintenance? Why conduct regular electrical preventive maintenance? According to the National Fire Protection Agency (NFPA), “nearly two-thirds of all electrical distribution fire losses could have been prevented.”

A documented arc flash study will make the facility compliant with OSHA codes and NFPA standards. Incident energies are calculated considering the individual time-current characteristic of each protective device as opposed to a single protective device model in the NFPA 70E tables resulting in more accurate values.

The arc flash hazard (or incident energy) calculations also are performed as part of the study. As mentioned previously, the calculations are typically based on IEEE 1584; however, the calculations can be based on the equations depicted in NFPA 70E or NESC, depending on the type of facility and/or electrical equipment involved.

The remainder of the study occurs within your plant, which brings us to the point of what you can do to best facilitate the process. Pre-planning. When planning for an arc flash hazard study, it's important to consider who at your facility will need to be present for each phase of the process.

Arc Flash Studies What is Arc Flash? An arc flash can occur when there is a rapid release of energy due to a ground fault, or phase to phase fault. This is not merely a short circuit event. This is a short circuit that results in so much energy release that the equipment is vaporized. … Arc Flash Studies Read More »

Why Every Facility Needs Arc Flash Labels. ... Make the smart choice and get an arc flash analysis study started today. ... If the sticker says it has an incident energy level of 4.6 cal/cm2 — and all your arc flash PPE items are individually rated for 8 cal/cm2 — then you can rest assured you have sufficiently rated PPE. If you have site ...